and conditions the bearing edge for fast, easy tuning!
Strengthens and conditions the top of the bearing edge
where it contacts the drum head. Solid stick, comes in
an easy to use twist tube for a no mess application.
This is not a wax, soap or a petroleum product. It
allows the drum head to glide smoothly over the bearing
edge without effecting the sound of the drum. Waxes,
soaps and petroleum products (ski wax etc.) deaden the
and effect the natural sound of the drum.
Made from a proprietary blend of extreme high pressure
lubricants and conditioners. Drumdial designed this
product specifically for drums. Research, development
and product testing over many years, have produced the
best bearing edge conditioner available.
Drumdial Bearing Edge Conditioner will not harm wood,
plastics or metal.
How to use:
Wipe down and clean the bearing edge to
remove any build up of lint or dust.
Apply the bearing edge conditioner in a
smooth non stop application to the
entire top bearing edge, rub in excess
with your finger tip or wipe off with a
dry cloth or paper towel. No need to
force down on the conditioner stick. A
light touch is all that is needed.
Rotate the wheel at the tube bottom to
dispense the edge conditioner.
Try to keep the conditioner on the top
of the bearing edge only, where the drum
head comes in contact. Excess
conditioner to the bearing edge sides is
The conditioner stick will form a nice
groove to take the shape of the top
bearing edge, excess force is not
crackling is normal at the Initial seating of
the drum head. The cracking sound you are
hearing after the head is seated is the drum
head collar catching on the bearing edge.
Try a Before and After
Apply light pressure to the center of a drum
without the bearing edge conditioner and listen
for the cracking of the drum head as the head
collar catches on the bearing edge. Try it again
after application. Tuning becomes very smooth
and drum head skipping or jumping at the hoop
edge goes away.